SB1B-28 Standby Alternator Controller, 28v (Homebuilt) (B-Stock S/N: 1J80G2V61)

*B-Stock : light scuffs or scratches, please call for more details*

The SB1B-28 is designed to provide standby alternator control for our BC410-H or BC462-H Alternators in a single bus, single battery electrical system.  It provides linear (“quiet”) voltage regulation, and solid-state over-voltage protection. Note: low-voltage monitoring and warning system designed for use with an incandescent lamp only (supplied).

Will NOT function with a Vertical Power device (VPX).

For Experimental Aircraft ONLY

Installation Note:

Select a location for mounting that will protect unit from heat, vibration, and water. The pilot side of the firewall, or inside the cabin near the instrument panel, is recommended.